9 VBD Series Vacuum Belt Dry (for Powder & Particle)
VBD Series Vacuum Belt Dry (for Powder & Particle)
Technical Principle:
There are 3-11 layers of conveyor belts inside the cylindrical shell, the more the layers, and the larger the capacity. By feeding and distributing device, the wet solid material is input continuously, and then distributed evenly on the conveyor belt under vacuum. Motion of the belt stirs the materials constantly, which speeds up evaporation, thus shortens the drying time, and also makes sure homogeneity during drying. The drying temperature and drying time (from feed-in to discharge) are adjustable (30-1500℃) (20-80 min). If the dried product needs granulation, it can be com-minuted under vacuum, no dust flyingappears, which collecting device. Organic solvent in the wet materials can be recycled by our system, removing pollution problem caused by traditional dryers, and adding profit. Application Scope:● Pharmaceutical, food, chemical, biological.● Drying material state:solid, crystal, particle, powder, pills, fruit & vegetable slices orchips, leaves, etc.● Some special material: easy oxidation, easy explosion, strong stimulation, hightoxicity.● Material need solvent recycling.
Equipment Advantage:● Under the condition of vacuum continuous feed continuous discharge.● Pieces to realize the automation and continuous drying technology, pipelining.● Drying process temperature of 30-150℃ adjustable.● Operating cost is the third of the traditional drying process.● Product yield reached above 99%● Drying time 20-80 minutes adjustable.● Mixer greatly reduce labor costs.● Adopts PLC automatic control system.● In pieces to reduce the pollution caused by dry process complex link.● Pieces to achieve product requirements for solvent recovery in drying process. ● Online automatic cleaning, in line with the GMP requirements.
Technical parameter

ผู้ดูแลระบบ 07/12/2017

8 Type Freeze Dryer
Type Freeze Dryer
ZG series contact type freeze dryer, the shelf has both heating and cooling functions; conform to the GMP standards. It's suitable for laboratory test and a small amount of production.
Main features: ● The process of pre-cooling and drying finishes in the chamber. The drying process is automatic; ● The shelf uses circulating medium, the shelf temperature is adjustable and the difference is less than or equal to 1℃.The drying effect is uniform; ● Touch screen operation, PLC controlling, and real-time monitoring; ● Connecting to the computer, remote control, and freeze-drying curve recording; ● The integrated design is easy to transport and install, and also save space; ● The CIP and SIP cleaning system, hydraulic system and other systems are optional.
Technical parameter

ผู้ดูแลระบบ 07/12/2017

7 Radiation Type Freeze Dryer
Radiation Type Freeze Dryer
Main features:● High efficient, stable and high quality imported Refrigerator, easy to maintain and operate;● The vacuum system has dual system: the pre-pumping unit and the maintenance unit; improve the stability and durability of the system;● Equipped with the independent quick freezing room, the pre-cooling and drying are finished separately to shorten the producing time and ensure continuous producing;● Touch screen operation, PLC controlling, real-time monitoring, and alarm function;● Connecting to the computer, remote control, freeze-drying curve and data recording;● Use international standard refrigerant achieve good cooling effect. Energy saving and green development.
Technical parameter

ผู้ดูแลระบบ 07/12/2017

6 DW Series Belt Dryer
DW Series Belt Dryer
Description:The raw materials to be treated should distribute on the conveyor belt throughsuitable mechanism such as star distributor, swing belt, crusher or granulator, Theconveyor passes through the channel including of one or several heating unit. Eachheating unit is equipped with air heater and circle system. Each channel has one orseveral damp discharge systems. When the conveyor passes through it, hot air willpass through the raw material from up to low or from low to up. In this way the rawmaterials can be dried evenly.
Applications:The belt dryer is an ordinary continuous drying equipment.It is widely used forchemical industry,food stuff industry, pharmaceutical industry,construction materialsindustry, electronic industry and so on. Especially it is suitable for drying rawmaterials that are good in breath ability and have the shape or pieces or strip ofgranule. It is also possible to dry the pasted raw materials such as fi lter cake aftershaped through granulator or extrude.
Technical parameter

ผู้ดูแลระบบ 06/12/2017

5 CT-C Series Hot Air Circulation Drying Oven
Applications: CT-C series hot air circulation drying oven adopts noise elimination and thermal stable axial flow fan and automatic temperature control system. The entire circulation system is enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efficiency can be up to 50%. This drying oven is suitable for the material and product hot solidify cation and dry de-watering in the pharmaceutical, chemical, food, farming, side-product, aquatic product, light industries, heavy industry and other industries. Such as: raw material medicine, crude drug, prepared herbal medicine of Chinese traditional medicine, plaster, powder, particle, drinking agent, pill, packing bottle, pigment, dyestuff, de watering vegetable, dried fruit piece, sausage, plastics, resin, electric component, baking varnish and etc. ● Options of heat source: steam, electricity, or far infrared, or both steam electricity. ● Drying temperature: steam heating 50-130 ℃, Max.140 ℃. ● Electricity and far infrared: 50-300 ℃. Automatic control system and computer control system on request. ● Commonly used steam pressure 0.2-0.8Mpa (2-8 bar). ● For CT-C-I, electric heated, rated power consumption:15Kw, real consumption: 5-8 Kw. ● Baking plate dimensions:460*640*45mm
Characteristics: Most hot air is circulated in the oven. The Heat efficiency is high and the energy is saved. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly. The heating source might be steam, hot water, electricity and far infrared. With a wide selection. The whole machine is low in the noise. The operation is in balance. The temperature is controlled automatically. The installation and maintenance are easy. The application is wide. The machine can be used for drying various materials and is a versatile drying equipment.
Technical parameter

ผู้ดูแลระบบ 06/12/2017

4 Vacuum dryer
Vacuum dryer
 
 Application：It is suitable for drying heat sensitive raw materials of pharmaceutical industry, chemical industry, foodstuff industry, electronic industry, Chinese traditional medicine industry, etc.
Features:● It can get higher drying speed at lower temperature and the heat energy can be used fully.● It can dry at low temperature or can dry heat sensitive raw materials.● It can dry raw materials that contain solvent and the solvent needs to recover.● Before drying, It can carry out disinfectant treatment. During the period of drying, any impurity can not enter in it.● The dryer belongs to static vacuum one, the shape and volume of raw materials can not be damaged

      Technical data

ผู้ดูแลระบบ 14/09/2017

3 Hot-air oven
Hot-air oven
Main Usage
This machine is widely applied for the heating and dehumidifying of raw materials and products in the lines of pharmacy, chemical, foodstuff, light industry, heavy industry etc.

Specialty
Great part of hot wind is circulated in the oven with high thermal efficiency, less energy consumption. The oven is equipped by the adjustable air-distributing plates to utilize the forced ventilating to dry the target materials evenly. The whole machine runs in stable condition, low noise, self-control temperature, easy installing and maintaining, and wide application.

Technical data
ผู้ดูแลระบบ 14/09/2017

2 LPG High Speed Centrifugal Atomizing Dryer
LPG High Speed Centrifugal Atomizing Dryer
Descriptions：   The spray drying is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle or block solid products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies.
Principle of work：   After filter and heating, the air enters into the air distributer at the top of the dryer. The hot air enters into the drying chamber in the spiral form uniformly. By passing through the high-speed centrifugal atuomizer at the top of the tower, the material liquid will be rotated and sprayed into extremely fine mist liquid beads. Through the very short time of contacting with hot air, the material can be dried into the finished products. The finished products will be discharged continuously from the bottom of the drying tower and from the cyclone separator. The waste gas will be discharged by blower.
Application： Food Stuff: Amino acid, Vitamin, flavoring, protein, dried milk, pig blood powder, soy powder, coffee, tea powder, Glucose, Potassium sorbate, pectin, essence, vegetable juice, yeast, starch etc.Ceramics: alumina, zirconia, magnesium oxide, titanium oxide, magnesium titanate, pottery clay, china clay, all kinds of magnetic porcelain and metal-oxides etc.Chemical Products: dispersed dyestuff, active dyestuff, organic catalyst, white carbon black, detergent powder, zinc sulfate, sodium metasilicat, potassium fluoride, calcium carbonate, tribasic potassium phosphate, inorganic catalyst and all kinds of waste liquid etc.Model
Explanation of code
101-Cover of air filter102-Draught fan103-Heater (Electricity, Steam, Oil fuel, Gas, Coal)104-Tank of raw material105-Supply Pump106-Atomizer107-Drying tower108-First grade dust collector(Cyclone)109-Second grade dust collector(Cyclone, Bag filter)110-Suction fan111-Damp duster (Powder Duster
Technical Paramerters 

ผู้ดูแลระบบ 14/09/2017

1 LPG Series High Speed Centrifugal Atomizing Dryer
LPG Series High Speed Centrifugal Atomizing Dryer

Description:
  The spray drying is the widest used technology in the liquid shaping technology andin the drying industry. It is most suitable for producing powder, particle, or block solidproducts from materials of solution, emulsion, soliquoid and pumpable paste states.Therefore, when the particle size and distribution of the fi nal products, their residualwater contents, the stocking density and the particle shape meet the precisionstandards, the spray drying is one of the most desired technologies
Application:
  Food Stuff: Amino acid, Vitamin, flavoring, protein, dried milk, pig blood powder,soy powder, coffee, tea powder, Glucose, Potassium sorbate, pectin, essence,vegetable juice, yeast, starch etc.Ceramics: alumina, zirconia, magnesium oxide, titanium oxide, magnesium titanate,pottery clay, china clay, all kinds of magnetic porcelain and metal-oxides etc.Chemical Products: dispersed dyestuff, active dyestuff, organic catalyst, whitecarbon black, detergent powder, zinc sulfate, sodium metasilicat, potassium fl uoride,calcium carbonate, tribasic potassium phosphate, inorganic catalyst and all kinds ofwaste liquid etc.
 Principle of work:
   After fi ltering and heating, the air enters into the air distributor at the top of the dryer,The hot air enters into the drying chamber in the spiral form uniformly. By passingthrough the high-speed centrifugal atomizer at the top of the tower, the materialliquid will be rotated and sprayed into extremely fi ne mist liquid beads. Through thevery short time of contacting with hot air, the materials can be dried into the fi nishedproducts. The fi nished products will be discharged continuously from the bottom ofthe drying tower and from the cyclone separator. The waste gas will be dischargedby blower.
Characteristics:
● High speed of drying. After the spraying of he material liquid, the surface areaof the material will be increased greatly. In the hot-air fl ow, 95%-98% of water canbe evaporated at a moment. The time of completing the drying needs only severalseconds.● It is especially suitable for drying the heat sensitive materials. It's fi nal productsown the good uniformity, mobility, dissolving capacity. And the final products arehigh in purity and good in quality.● The production procedure is simple and the operational control is easy. The liquidwith the moisture contents 40-60%(for special materials, the contents may reach90%) can be dried into power or particle products once a time. After the drying, thereis no need for smashing of sorting, so as to reduce the operation procedures in theproduction and enchance the purity. The product particle diamenters, looseness andwater contents can be adjusted through changing the operation condition in a certainscope. It is very convenient to carry out the control and manag
Technical Parameters
..   
ผู้ดูแลระบบ 14/09/2017